A good watch is more than something to tell the time. It can be a tool, a statement, or something with real sentimental weight — bought for an occasion, passed down, or just picked because it felt right. Either way, it deserves to be looked after.
Most people don't look after them properly, but not from carelessness. More from not knowing what proper care actually involves. You wear it, wipe it down occasionally, hope for the best. That works until it doesn't — scratched crystal, ruined strap, a movement that hasn't been serviced in a decade, or water damage that blindsided you. None of it has to happen.
This covers what you actually need to know: daily handling, cleaning by material, what water resistance really means, how to store a watch, and when to hand it to a watchmaker.
Daily handling
Most watch damage is cumulative, not dramatic. A crown nudged too often. A case sitting next to keys in a pocket. A movement knocked around by one desk impact too many.
The crown. When you're fastening a bracelet or buckle, don't pull the strap tight while the crown is pulled out. It's the most vulnerable part of the watch — the main entry point for moisture and dust, and it takes more stress than people realise. Screw-down crowns need to be properly tightened after every adjustment. Leaving one unscrewed before a shower has wrecked more than a few movements.
Impacts. Watches handle ordinary life fine. But "ordinary" has limits. Dropping it on a hard floor, knocking it against a doorframe, or using heavy tools while wearing it — those kinds of impacts can shift pivots, crack crystals, or damage the rotor in an automatic. You don't have to treat it like it's fragile. Just pay attention to when you're doing something the watch wasn't made for.
Magnets. This one catches people off guard. Mechanical movements can be affected by sustained exposure to magnetic fields — smartphones sitting directly on the watch, speaker cabinets, bag clasps, airport security. It usually shows up as sudden, significant timekeeping errors. A watchmaker can fix it cheaply, but it's worth avoiding.
Temperature. Heat degrades lubricants and expands materials. Cold affects battery performance and oil viscosity in mechanical movements. Don't leave a watch on a car dashboard in summer or wear it in a sauna, even if the specs suggest it can take it.
When to take it off. Heavy gym sessions with bars or weights that impact the wrist. Any manual work with tools, chemicals, or rough surfaces. Sleep — you can't feel what the crown and bracelet are pressing against for eight hours. The watch doesn't need to be on your wrist at all times.
Crystal types. Sapphire is very hard to scratch but can crack on impact. Mineral glass scratches more easily but handles knocks better. Acrylic (common in vintage and budget watches) scratches easily but can often be polished back. Knowing which you have tells you what to protect: with sapphire, it's impacts; with mineral and acrylic, it's abrasion.
Cleaning
Skip this regularly and it shows — grime, discoloured straps, and the smell that develops when sweat sits on leather or rubber for weeks.
You don't need much: a soft microfibre cloth, a soft-bristle brush (a clean toothbrush is fine), mild soap or a watch-specific cleaner, and lukewarm water.
Case and crystal. A microfibre cloth handles fingerprints and light surface dirt on polished metal without scratching. For brushed or matte finishes, avoid anything abrasive — including cloths designed for shiny metal, which will wreck the texture. A damp cloth is usually all you need. The crystal can be wiped dry; a small amount of moisture helps with stubborn smudges.
Leather straps. Keep them away from water. A cloth dampened with water removes surface dirt; leather conditioner or a leather-specific cleaner keeps the strap from drying out and cracking. The honest truth is that leather exposed to regular sweat won't last forever regardless of how well you clean it. At some point you're replacing it, not just conditioning it.
Metal bracelets. These collect the most grime — in the links, between the lugs. A soft brush with soapy water clears it out. Rinse with clean water and dry thoroughly. Trapped moisture between links causes corrosion.
Rubber and silicone. The easiest to clean. Damp cloth for light dirt, mild soap and a brush for anything worse. Rinse and air dry.
How often. Wipe the strap after workouts, at minimum once a week. Clean the case every couple of weeks. A thorough clean — bracelet, case, crystal together — is worth doing monthly.
What not to use. Alcohol-based cleaners and common household detergents can damage finishes, degrade gaskets, and discolour straps. Abrasive cloths and paper towels leave marks on polished surfaces. Ultrasonic cleaners are useful in a watchmaker's hands, but they're not safe for everything — some crystals and adhesives don't tolerate them.
Water resistance
"Water resistant" doesn't mean waterproof. That distinction causes a lot of avoidable damage.
Ratings — in metres, ATM, or bar — reflect static pressure in lab conditions, not real-world depth. A 30-metre rating covers splashes and rain, not swimming. 50 metres handles swimming in calm water. 100 metres covers recreational swimming and snorkelling. 200 metres and above is actual dive territory.
What most people miss: these ratings degrade. The gaskets and seals that create the barrier age, compress, and crack. Impact, chemicals, and regular crown use all accelerate that. A watch that was water-resistant when it left the factory may not be years later, even if you've never submerged it.
Situations worth avoiding. Hot showers — the temperature change accelerates seal degradation. Saltwater — corrosive, rinse it off immediately. Soap and shampoo can get into seals. Adjusting the crown while in water is a reliable way to flood the movement.
If it gets wet unexpectedly. Dry it straight away with a soft cloth. Don't use heat — no hairdryer, no radiator. If there's any fogging or condensation under the crystal, get it to a watchmaker fast. Moisture in a movement causes corrosion quickly.
Testing and resealing. Have the water resistance tested professionally every one to two years if you wear the watch near water regularly. It's pressure testing plus gasket replacement where needed. Inexpensive, and far cheaper than the repair bill if you skip it.
Storage
Day to day. A watch box with individual cushioned compartments keeps things stable and separated. How to Store Watches Properly Without a Watch Box works if you travel often. The principle is simple: watches shouldn't be rattling around together.
Long term. Cool, dry, away from direct sunlight (which fades dials and degrades some materials) and away from humidity. A drawer works if it meets those conditions. A display case next to a south-facing window looks good and isn't ideal.
Watch winders. How do watch winders work: a guide for automatic watch owners are worth it if you rotate between several automatics and don't want to reset the time and date every time you pick one up. Not necessary if you wear the same watch daily. Potentially counterproductive for a simple time-and-date watch — a winder just adds running hours to the movement for no benefit.
Quartz watches in long-term storage. Remove the battery, or at least make sure it's fresh before storing. Old batteries leak. The damage to a movement can be significant and sometimes permanent.
What to keep away from stored watches. Magnets are obvious. Less obvious: rubber bands left in contact with a case can leave marks and affect certain finishes over time. Chemical products — polishes, solvents, cleaning agents — keep them away from. The Ultimate Guide to Men’s Watch Care: Tips and Tricks for Keeping Your Timepiece in Top Condition Other jewellery is a scratch risk unless everything is individually cushioned.
Servicing
This is the part people tend to treat as optional. It isn't.
A watch that appears to be running fine can still be deteriorating inside — lubricants drying out, friction building, seals failing. Servicing catches those problems before they get expensive.
When. Mechanical and automatic watches: every four to six years as a rule, though complicated movements may need it sooner and some modern movements can go longer. Quartz watches: battery checks every one to two years, full service less frequently. If you've bought or inherited a watch without service records, have it looked at before wearing it regularly. You don't know what's going on in there.
What a real service includes. Full disassembly, ultrasonic or solvent cleaning of every component, inspection for worn or damaged parts, replacement of whatever needs it (mainspring, gaskets, keyless works), fresh lubrication throughout, reassembly, timing adjustment across multiple positions, case and bracelet cleaning, and pressure testing. That's a service. If a watchmaker offers to "service" the watch without disassembly, that's a regulation — not a service.
Where to go. You've got two choices: manufacturer-authorised service centres or independent watchmakers. Authorised centres use genuine parts, employ factory-trained technicians, and issue documentation that carries weight for insurance and resale. They're slower and more expensive. Independent watchmakers certified by the British Horological Institute or the American Watchmakers-Clockmakers Institute can do excellent work, often faster and at a more reasonable price. Get recommendations, ask what's included, check reviews.
Go sooner if you notice. Timekeeping that's drifted from its normal accuracy. Power reserve that's shorter than it used to be. The watch stopping unexpectedly. A crown that feels stiff or gritty. Fogging under the crystal. These aren't things to monitor — they're things to act on.
Keep records. After every service, keep the invoice — ideally one that lists what was inspected, what was replaced, and what the timing results were. It adds value at resale, tells future owners the piece was looked after, and helps you track when the next service is due. Like car service records. Worth doing from the first service.
Conclusion
The short version: clean it regularly, handle it sensibly, store it properly, service it on schedule.
What actually makes the difference is consistency. A wipe-down after a workout. Leaving it on the nightstand before bed. Knowing what your water resistance rating actually covers. Small habits, done regularly, are the difference between a watch that's still running well in thirty years and one that needed expensive work after five.
A well-kept watch holds its value and arrives at resale — or at whoever inherits it — looking like someone gave a damn. Because you did.
FAQs
What's the best way to clean a men's watch? Microfibre cloth for the case and crystal. Soft brush with mild soapy water for metal bracelets. For leather straps, don't soak them — use a slightly damp cloth and follow up with a leather conditioner. Air-dry everything and keep household cleaners away from any part of the watch.
How often should a men's watch be serviced? Every four to six years for mechanical and automatic watches. Quartz watches need battery checks every one to two years, with a full service less often. Bought or inherited a watch with no service history? Get it checked before wearing it regularly.
Can I wear my watch swimming or in the shower? Depends on the rating. 50 metres is generally fine for swimming in calm water; 100 metres handles more active use. Showers are best avoided even with water-resistant watches — heat and soap wear down seals faster than you'd expect. Check the manufacturer's guidance for your specific watch.
How should I store a watch I'm not wearing? In a watch box with cushioned compartments, away from sunlight, humidity, and anything magnetic. Keep it separated from other jewellery. If you're storing a quartz watch for a long time, take the battery out to prevent leakage.